Bed Use - Hammerhead Charger 48V Operator's Manual

BED USE
A manual lift bed is standard for the vehicle.
Failure to follow these instructions may result in personal injury, damage the
vehicle and/or cause the vehicle to tip over. Operate the vehicle with awareness
of the load. Read, understand and follow the warning instructions on the front of
the load bed.
DO NOT PERMIT ANYONE TO RIDE IN THE BED. Before operating, ensure no one
is behind the vehicle.
A load bed warning label is affixed to the inside front of the bed. This vehicle bed is
rated at 250 Lbs. This label must be understood and observed at all times for
safety operation of the vehicle. See the load bed warning label for maximum load
capacity. The load must be positioned in the bed as far forward as possible and
securely fastened down.
Never fill a gas can in bed of a vehicle. Static discharge could ignite gasoline
vapor and cause an explosion.
Always place a gas can on the ground before filling. NEVER fill a gas can in the bed
of the vehicle. Static electricity is build up during the fueling process and could
discharge causing the gasoline vapor to ignite.
Hammerhead Charger Electric Vehicle Operator's Manual Page 14