Accelerator Pedal; Brake Pedal; Parking Brake Lever - Hammerhead Charger 48V Operator's Manual

ACCELERATOR PEDAL
With the key switch "ON", release the parking brake, depressing the accelerator
starts the motor. When pedal is released, the motor will stop. To stop the vehicle
more quickly, depress the brake pedal. (See image below)
BRAKE PEDAL
This vehicle is equipped with hydraulic brake system that controls a set of four brake
discs; one on each wheel. To slow down the vehicle or to stop the vehicle, depress
the brake pedal. Depressing the brake pedal further will increase the effectiveness of
braking. (See Image Below)
PARKING BRAKE LEVER
This vehicle is equipped with parking brake lever. Push the release button and then
pull the parking brake lever up to active parking brake. When parking the vehicle,
pull up the parking brake and then turn the key to "OFF" position. (See image below)
To release the parking brake, push the release button in and then push the parking
brake lever down.
Hammerhead Charger Electric Vehicle Operator's Manual Page 13