Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Whirlpool FreshCare WFWDC96
Summary of Contents for Whirlpool FreshCare WFWDC96
- Page 1 User Manual www.whirlpool.com.au...
-
Page 2: Safety Instructions
SAFETY INSTRUCTIONS IMPORTANT TO BE READ AND OBSERVE Before using the appliance, read these safety Items such as foam rubber (latex foam), instructions. Keep them nearby for future reference. shower caps, waterproof textiles, rubber backed These instructions and the appliance itself provide articles and clothes or pillows fitted with foam important safety warnings, to be observed at all rubber pads should not be dried in the tumble... - Page 3 ELECTRICAL WARNINGS must be stored out of reach of children - risk of It must be possible to disconnect the suffocation. The appliance must be disconnected appliance from the power supply by from the power supply before any installation unplugging it if plug is accessible, or by a multi- operation - risk of electric shock.
-
Page 4: Product Description
DAILY REFERENCE GUIDE THANK YOU FOR BUYING A WHIRLPOOL PRODUCT. Download the Instructions for use from the website http://docs.whirlpool.eu For even more complete user support, register your appliance at www.whirlpool.com.au Follow the procedure described on the last page. Please read the content of the Health &... -
Page 5: First Time Use
DETERGENT DISPENSER Prewash Compartment • Detergent for prewash Main Wash Compartment • Detergent for the main wash • Stain remover • Water softener Softener compartment • Softener • Liquid starch Pour softener or starch solution into the compartment without exceeding the “max” level. Release button (Press to remove tray for cleaning). -
Page 6: Daily Use
DAILY USE 2. Press “Drying settings” to select the required drying mode. For more information on functions, a more detailed guide may Two drying modes are available: automatic or timer. be requested or downloaded from the website following the instructions given on the last page. - Automatic drying with selectable levels: In automatic drying mode, the washer dryer machine dries the LOADING LAUNDRY. - Page 7 - Timer drying mode: Press button “Drying settings” repeatedly to set timer drying mode. After cycling through all the automatic drying levels, continue pressing button “Drying settings” until the desired time is displayed. Values from 210 to 30 minutes are settable. N.B.: always allow a cooling down period after drying before opening the door.
-
Page 8: Hints And Tips
HINTS AND TIPS RULES FOR SEPARATING LAUNDRY WARNING: In the appliance enclosure or in the built-in structure, keep ventilation openings on the bottom of the appliance clear • Fabric type / indications on label (cotton, mixed fibres, synthetic, of obstruction. wool, handwash items) • Colour (separate coloured garments from whites, wash new WARNING: the appliance is not to be used if industrial chemicals... -
Page 9: Programme Chart
PROGRAMME CHART Detergents and Recommend- additives ed detergent MIXED - 40°C 1000 COTTON - 60°C 1600 SYNTHETICS 1200 - 60°C RAPID 30’ - 30°C SPORT - 40°C WASH & DRY 45’ 30°C 1600 WASH & DRY 90’ 30°C 1200 SPIN & DRAIN * 1600 RINSE &... - Page 10 PROGRAMMES Follow the directions indicated in the garment wash SPIN & DRAIN symbols. Spins the load then empties the water. For resilient garments. RINSE & SPIN MIXED Rinses and then spins. For resilient garments. For washing lightly to normally soiled resilient garments in cotton, linen, synthetic fibres and mixed fibres.
-
Page 11: Cleaning And Maintenance
CLEANING AND MAINTENANCE WARNING Never use flammable liquids to clean the washer dryer. Be sure to turn off the washer dryer and disconnect it from its electrical power supply before performing any cleaning or maintenance operations. CLEANING THE WASHER DRYER EXTERNALLY Clean the washer dryer's external parts using a soft Do not use generic detergents, glass detergents, damp cloth. -
Page 12: Checking The Water Intake Hose
CHECKING THE WATER INTAKE HOSE Periodically check the integrity of the water intake hose. If it is found to be damaged, contact Customer Support or an authorised dealer in order to obtain a replacement hose. Based on the type of hose: For flood protection hoses: check the safety valve's inspection window (see the arrow). -
Page 13: Cleaning The Filters In The Water Intake Hose
CLEANING THE FILTERS IN THE WATER INTAKE HOSE . Close the water tap and unscrew the intake hose. . Re-insert the mesh filter. Reconnect the intake hose to the water tap and the washer dryer. Do not use tools to connect the intake hose. -
Page 14: Cleaning The Detergent Dispenser
CLEANING THE DETERGENT DISPENSER Remove the detergent dispenser by pressing the release Dry with a soft cloth. button and pulling on the dispenser at the same time. Re-install the detergent dispenser and close it. Remove the insert from the fabric softener compartment. Wash the components under running water, taking care to remove all the detergent and fabric softener residues. -
Page 15: Cleaning The Water Filter / Draining The Residual Water
CLEANING THE WATER FILTER / DRAINING THE RESIDUAL WATER WARNING The water filter should be cleaned regularly in order to prevent water from remaining inside the appliance after wash cycles due to filter obstructions. Make sure that the washer dryer has been shut off and disconnected from its electrical power supply before cleaning the water filter or draining the residual water.If a high temperature wash programme has recently been used, wait for the water to... - Page 16 Clean the water filter: remove any residues from the filter and wash it under running water. Insert the water filter and reinstall the kick panel: Re-insert the water filter by turning it clockwise. Turn it as far as it will go; the filter's grip should be in its vertical position.
-
Page 17: Transport And Handling
TRANSPORT AND HANDLING WARNING Do not lift the washer dryer while holding onto its upper surface. Disconnect the electrical plug and close the water tap. Check to make sure that the door and the detergent dispenser are securely closed. Disconnect the intake hose from the water tap, then disconnect the drain hose. -
Page 18: Troubleshooting
TROUBLESHOOTING The washer dryer may sometimes not work properly for certain reasons. Before calling the Support Centre, it is recommended to check to see if the problem can be easily resolved using the following list. Anomalies: Possible causes / Solution: The washer dryer does not turn on. - Page 19 Too much foam is formed. • The detergent is not compatible with the washer dryer (it must bear the wording “for washing machines”, “ for hand washing and washing machines”, or something similar). • The dosage was excessive. The washer dryer does not dry. •...
- Page 20 The telephone number is indicated in the warranty booklet. > Download the guide from the Whirlpool website http://docs.whirlpool.eu To do this, you need to enter the correct commercial code of the product indicated on the adhesive label.
- Page 21 10 mm - 0,39 inch 150 ml 100 ml 50 ml 2 cm - 0,7 inch...
- Page 22 max 0,5 cm max 0,2 inch max 100 cm 39 inch max 100 cm min 65 cm 39 inch 25 inch min 65 cm 25 inch max 100 cm 39 inch min 65 cm 25 inch...