Tcp/Ip Minimum Configuration And Startup Worksheet - IBM InfoPrint Color 100 Introduction And Planning Manual

Ibm infoprint color 100
Table of Contents

Advertisement

permissions are assigned to the folder. InfoPrint Color 100 appears in the Macintosh Chooser, under
Appleshare, as a file server. After connecting to it, the Macintosh Volume name, set up at the controller,
appears as the available resource. More than one Macintosh Volume can be set up at InfoPrint Color 100.
All of the setup Macintosh Volumes will appear once the connection has been made to the InfoPrint Color
100.
InfoPrint Color 100 also provides a software utility called Dispatcher which makes the InfoPrint Color 100
appear in the Macintosh Chooser as a printer under LaserWriter. This can be used to print directly to the
InfoPrint Color 100 instead of transferring PostScript files. This software also provides the functionality to
download fonts to the InfoPrint Color 100 using the standard LaserWriter font download utility or any other
commercially available font downloader compatible with the LaserWriter driver.
TCP/IP Minimum Configuration and Startup Worksheet
Use this worksheet to assemble specific information about your network that will be needed during the
installation and configuration of your InfoPrint Color 100.
System Name:_______________________________________
Date: _____________
Network Administrator:___________________________________________________
A. Network interface:___________________________________________________
Standard Ethernet, IEEE 802.3 Ethernet, or Token Ring
B. Host name: IBM_Color_xxxx ________________________________
Where xxxx are the last 4 digits of the print tower serial number (the XPS number)
C. Internet address:____________________________________________________
Address on the Internet. Do not write in leading zeroes.
(For example, do not write 002.020.12.010; instead write 2.20.120.10.)
The default address is 127.20.20.10.
D. Network Mask:________________________________________________________
Network mask if your network uses mask addresses.
The default mask address is 255.255.255.0.
E. Name server Internet address:________________________________________
Required if your network uses a name server
F. Name server domain name:_____________________________________________
Required if your network uses a name server
G. Default gateway Internet address:____________________________________
Required if your network uses a gateway
H. AppleTalk local zone:________________________________________________
Required for connecting to Macintosh
I. AppleTalk default zone:______________________________________________
Required for connecting to Macintosh
J. Domain name:_________________________________________________________
Required for connecting to PC
K. Service name:________________________________________________________
Required for connecting to PC. Alias for printer name; similar to host name.
L. All PC user IDs to be added to the configuration:____________________
Required for PC connect to RIP controller
34
IBM InfoPrint Color 100 Introduction and Planning Guide

Advertisement

Table of Contents
loading

Table of Contents