Radio Operation - Sanyo FXD-885GD Operating Instruction

RADIO OPERATION

SELECTING RADIO MODE
Press the BAND button
Each time the BAND button is pressed, the selected band changes as shown below.
FMI FMII
RADIO TUNING
• Automatic tuning ............ Press the < or > button
• Manual tuning ...................To select higher frequency stations, press the > button for less than 0.5 seconds.
STORING PRESET STATIONS
The preset buttons
access to your favorite stations.
• Programming stations.........................
• Quick tuning.................................. Select the desired band, then press one of the six preset buttons.
1
to switch from CD player or CD changer* mode to the radio.
MW
........................................................ 2
When the button is released, the system will start automatic tuning and stop
at the next receivable station.
To select lower frequency stations, press the < button for less than 0.5 seconds.
To quickly scan up or down in frequency, press and hold the < or > button.
Release the button when the display approaches the desired frequency, then
press and release the button repeatedly until the desired frequency is displayed.
can be used to store 6 stations in each band (FMI, FMII and MW) for convenient
Select the desired band, then tune in the station you want to store in
1
Press and hold one of the preset buttons for more than 1.5 seconds.
2
Repeat steps
3
........................................ 1
for more than 0.5 second.
................................... 3
memory.
and
1
-9-
4
2 2
5
* If a CD changer is connected.
to program additional stations.
2