Step 1: Install The Projection Tv - Sony KF-WS60 Operating Instructions Manual

Step 1: Install the
projection TV
To obtain the best picture, do not expose the
screen to direct illumination or direct sunlight. It is
recommended to use spot lighting directed down
from the ceiling or to cover the windows that face
the screen with opaque drapery. It is desirable to
install the projection TV in a room where the floor
and walls are not of reflecting material. If
necessary, cover them with dark carpeting or wall
paper.
Carrying the projection TV
Carrying the projection TV requires at least two
people. Do not hold the pedestal or the front panel
of the projection TV. Doing so may cause these
parts to break off.
Do not grasp the pedestal or
the front panel of the
projection TV.
When moving the projection TV, place one hand
in the hole on the lower portion of the TV while
grasping the top with the other hand, as shown in
the illustration below.
Take precaution during the
installation
To ensure the safety of children and the projection
TV, keep children away from the TV during
installation. Climbing on or pushing the projection
TV or its stand may cause it to fall.
When installing the projection TV
against a wall
Keep the projection TV at least 10 cm away from
the wall to provide proper ventilation.
To prevent the projection TV from
falling
As a protective measure, secure the projection TV
as follows.
Using the projection TV stand with support
belts
You can use the projection TV stand model SU-
GW11 (for KF-WE42/KF-WE50, not supplied) or
model SU-GW12 (for KF-WS60, not supplied)
with a support belt.
11
,continued