Additional Information
Troubleshooting
If you have any problem while viewing your projection TV, please check the following troubleshooting
guide. If the problem persists, contact your Sony dealer.
Symptom
Snowy picture
• The connection is loose or
• Channel presetting is
Noisy sound
• The antenna type is
• The antenna direction needs
• Signal transmission is low.
Distorted picture
• Broadcast signals are too
Noisy sound
Good picture
• The TV system setting is
Noisy sound
Possible cause
the cable is damaged.
inappropriate or
incomplete.
inappropriate.
adjustment.
strong.
inappropriate.
Solutions
• Check the antenna cable and connection on
the projection TV, VCR and on the wall.
• Display the "Program" menu and select
"Manual Program" to preset the channel
again.
• Check the antenna type (VHF/UHF).
Contact a Sony dealer for advice.
• Adjust the antenna direction. Contact a Sony
dealer for advice.
• Try using a booster.
• Display the "Program" menu and select
"Manual Program".
Then, select "Low" for "Sensitivity".
• Turn off or disconnect the booster if it is in
use.
• If the sound of all the channels are noisy,
display the "Program" menu and select
"Auto Program" to preset the channels again.
• If the sound of some channels is noisy, select
the channel, then display the "Program"
menu and select "Manual Program". Then,
select the appropriate TV system ("TV
System").
Page
13
77
–
–
–
77
–
77
77
87
,continued