Sony KF-WS60 Operating Instructions Manual page 17

For KF-WE42/KF-WE50
Note
For instruction for KF-WS60, see page 19.
1
Turn off the power on the main unit. Wait
several minutes, then unplug the power
cord.
(The cooling fan will continue to blow for
about two minutes after turning the power
off.)
2
Wait at least 30 minutes after unplugging
the power cord to allow the lamp to cool
down before replacing it.
Take the new lamp out of the box.
Notes
• Do not shake the lamp. Vibration can damage the
lamp or shorten its life.
• Avoid touching the front glass of a new lamp or
the glass of the lamp receptacle. This may reduce
picture quality or lamp life.
3
Loosen the screws on the rear side panel.
This illustration is for KF-WE50. The screw for
KF-WE42 is located to the right.
4
Remove the front panel.
Note
The front panel cover is securely attached to the
cabinet. Pull firmly on the cover in the numbered
order (see illustration) with both hands to release it.
17
,continued