Sony KF-WS60 Operating Instructions Manual page 19

7
Reattach the front panel securely.
8
Tightly screw the side panel in its place.
This illustration is for the KF-WE50. The
screw locations for the KF-WE42 are
located inside those for the KF-WE50.
Notes
• Consult your Sony dealer for a Sony XL-2100 (for
KF-WE42/KF-WE50) replacement lamp.
• Take great care when replacing the lamp or
plugging in/unplugging the connecting cords.
Rough handling may cause the projection TV to
fall, damaging the TV, the TV stand and/or the
floor.
For KF-WS60
1
Turn off the power on the main unit. Wait
several minutes, then unplug the power
cord.
(The cooling fan will continue to blow for
about two minutes after turning the power
off.)
2
Wait at least 30 minutes after unplugging
the power cord to allow the lamp to cool
down before replacing it.
Take the new lamp out of the box.
Notes
• Do not shake the lamp. Vibration can damage the
lamp or shorten its life.
• Avoid touching the front glass of a new lamp or
the glass of the lamp receptacle. This may reduce
picture quality or lamp life.
19
,continued