Sony KF-WS60 Operating Instructions Manual page 29

To select a TV program quickly
1
Press and hold PROG +/–.
Only the program number will change
quickly.
Note
When you select a TV program quickly, the picture
may be disrupted.
This does not indicate a malfunction.
2
Release PROG +/– when the desired program
number appears.
Additional tasks
To Press
@/1.
turn off temporarily
The
projection TV lights up red.
adjust the volume 2 +/–.
%.
mute the sound
t
watch the video input
(VCR, camcorder, 1", "VIDEO 2", "VIDEO 3"
etc.) or "VIDEO 4".
To return to the TV screen,
press a.
watch the component HD/DVD to select "HD/
input DVD 1" or "HD/DVD 2".
(DVD, DTV To return to the TV screen,
press a.
receiver)
jump back to the
previous channel
display the on-screen
information*
* Some picture/sound settings, and either the program
number or video mode are displayed. The on-screen
display for the picture/sound settings disappears after
about 3 seconds.
indicator on the
1
to select "VIDEO
.
.
Setting the Wake Up timer
1
Press until the desired period of
time appears.
The Wake Up timer starts immediately after
you have set it.
Wake Up Timer: 10M
After 10 minutes
Wake Up Timer: Off
No Wake Up Timer
z Tip
To change the period of time quickly, press and hold
button.
2
Select the TV channel or video mode you
want to wake up to.
3
Press !/1, or set the Sleep timer if you
want the projection TV to turn off
automatically.
The indicator on the projection TV lights
up red when the TV goes into standby mode.
If any button is pressed within two hours after
the TV is turned on using the Wake Up timer,
this indicator will switch off.
To cancel the Wake Up timer
Press until "Wake Up Timer: Off" appears.
Note
If no buttons or controls are pressed for more than two
hours after the TV is turned on using the Wake Up timer,
the TV automatically goes into standby mode. To resume
watching the TV, press !/1 button on the remote.
Wake Up Timer: 12H00M
After 12 hours
,continued
29