Selecting The Video Input Source To View - Toshiba 40VL20 Series Owner's Manual

Setting the 3D Timer Lock
When the 3D Timer Lock feature is set to On, neither
the PIN input window nor the 3D start message will
be shown while the 3D Enable timer is active, even
if a switch to 3D Mode occurs. This helps to avoid
having to enter the 3D Lock PIN and view the 3D
start message every time when switching to 3D.
1
From the 3D Safety Settings menu, press Q
and Enter your 4-digit 3D PIN code.
2
Press or to select 3D Timer Lock and press
or to select On or Off .
Note:
The PIN input window appears when "continue" is
selected in the reminder dialogue for Enable 3D Timer,
even if 3D Timer Lock is activated.
Setting Enable 3D Timer
This feature helps to remind you not to watch 3D
video for extended periods of time. Once a set
period of time has passed, a dialogue will be shown
asking you if you wish to continue viewing in 3D or
not.
1
From the 3D Safety Settings menu, press Q
and Enter your 4-digit 3D PIN code.
2
Press or to select Enable 3D Timer and
press or to select Off , 30, 60, 90 or 120
minutes.
Displaying the 3D Important Info
This feature helps to remind you not to watch 3D
video for extended periods of time. Once a set
period of time has passed, a dialogue will be shown
asking you if you wish to continue viewing in 3D or
not.
1
From the 3D Setup menu, press
select 3D Important Info.
2
Press Q.
Adjusting 2D to 3D Depth
You can adjust an eff ect quantity to change the 2D
mode for the 3D mode.
From the Menu:
1
From the PREFERENCES menu, press
select 3D Setup and press Q.
2
Press or to select 2D to 3D Depth and
press Q.
3
Press or to select 1, 2, 3, 4, or 5.
Using the TV's features
From the Quick Menu:
1
Press QUICK. Select 3D Settings and press Q.
2
Press
press Q.
3
Press
Switching left and right images
The left and right eye shutter timing of the glasses
can be swapped. If 3D images look blurred, switch
the left and right sides of the 3D image.
1
Press QUICK . Select 3D Settings and press Q.
2
Press
and press
Normal.

Selecting the video input source to view

1
Press
video input mode list appears on the screen,
then press
input source (or touch p / o and U or u on
the TV left side panel to select required input
source directly).
2
Press Q.
VIDEO1 (o (1), COMPONENT/VIDEO INPUT,
or to
standard or component video input) ,
VIDEO2 (o (2), standard video input),
HDMI1, HDMI2, HDMI3, HDMI4 (HDMI input),
PC (o RGB/PC, PC input)
or to
or to select 2D to 3D Depth and
or to select 1, 2, 3, 4, or 5.
or to select Left and Right Image
or to select Swapped or
on the remote control until the
, or to select appropriate
Inputs
TV
VIDEO1
VIDEO2
HDMI 1
HDMI 2
HDMI 3
HDMI 4
PC
29