Selecting The Video Input Source; Labeling The Video Input Sources - Toshiba 34HF83 Owner's Manual

Selecting the video input source
Press TV/VIDEO on the remote control or TV front panel to view a
signal from another device connected to your TV, such as a VCR or
video disc player (see illustrations below). You can select ANT 1,
VIDEO 1, VIDEO 2, VIDEO 3, ColorStream HD1, ColorStream
HD2, DVI, orANT 2 depending on which input jacks you tLsedfor
connecting your devices (see "Connecting your TV" on page 7).
Note:
• WhenColorStrearc H D 1 or HD 2 is
selected, t he VIDEOOUT jack doesnot
outputa signal Toreceive a videoOUT
sv_lnal, usea videoor S videoIN
connection instead of theCo/orStream
connection.
SOURCE SELECTION
0: ANT 1
I:VkDEO
2:VkDEO
_:VIDEO 3
: O Or ream HDI
7: ANT 2
0 7:TO SELECT
PressElg 7V/VIDEO on theremote
control _ thecurrent s ignal
source Cpress TV/VlDEO again or
OTto_
SOURCE SELECTION
ANT 1
VIDEO 1
VIDEO 2
VIDEO 3
oIor ream HD2
DV_
ANT 2
TV/V_DEO:TO SELECT
PressingW/VIDEO on the TV_
the currentsignalsource
Labeling the video input sources
The VIDEO LABEL feature allows you to label each input source for
your TV from tile following preset list of labels:
- : Uses the default label name
VCR : Video cassette recorder
DVD : DVD video
DTV : Digital TV set-top box
SAT : Satellite box
CBL : Cable box
HD : DV1/HDCP device (see page 13.)
To label tile video input sources:
1. Press MENU, and then press _ or • until tile CUSTOM menu
appears.
2. Press • or • to highlight VIDEO LABEL.
@@@@@@
_GUSTOM
T_MER
ON OOh Om
SLEEp 0h_Om
CO OFF
Please note the following regarding
the DVl source selection:
This TIf is net intended for connection
to and should not be used with a PC
(personal computeO. See "Connecting
a device to the DVI/HDCP input" on
page 13 for details.
TV front panel
i
TV/VlDEO
ii
3. Press _ or • to display the VIDEO LABEL menu.
4. Press • or • to highlight the video source you want to label.
5. Press _ or • to select the desired label for that input source.
CUSTOM
6. Finish labeling the other video sources as desired. To return to the
previous menu, press • or • to highlight CUSTOM MENU,
and then press _ or •.
7. To exit the menu, press EXIT.
Note:
The HD (high definition5label is available for
DVI mode only (see "Selecting the video
inputsource" above, and "Connectinga
device to the DVI/HDCP ioput"on page 135
45