Selecting The Video Input Source To View - Toshiba 32RV600E Owner's Manual

Activating blue screen
With the blue screen function On, the screen
will automatically turn blue and the sound will be
muted when no signal is being received.
1
From the FUNCTION menu, press
select Blue screen.
2
Press or to select On or Off.
Note:
In the PC input mode, PIP mode (- page 25) or
teletext mode (- page 27), this function is not
available.
Activating the 4:3 stretch
When 4:3 stretch is activated, this function will
switch 4:3 format programmes into a full screen
picture.
1
From the FUNCTION menu, press
select 4:3 stretch.
2
Press or to select On or Off.
Note:
In HDMI signal format, this function is available.
Adjusting the brightness of side panel
You can adjust the brightness of side panel in
14:9 or 4:3, etc. mode.
1
From the FUNCTION menu, press
select Side panel.
2
Press or to adjust the settings as
required.
Side panel
Selecting the video input source to
view
1
Press L on the remote control until the video
input mode list appears on the screen, then
or L to select appropriate input
press ,
source (or press o on the TV right side panel
to select required input source directly).
Inputs
TV
HDMI1
HDMI2
HDMI3
HDMI4
PC
24
Using the TV's features
1
1
2
3
4
2
Press Q.
o 1 (o (1), video 1 input),
o 2 (o (2), video 2 input) or o 2S (S-video
input),
o 3 (o (3), component video input),
or to
o 4 (o (4), component video input),
HDMI1, HDMI2, HDMI3, HDMI4 (HDMI
input),
PC (o RGB/PC, PC input)
Notes:
• When the component video input, PC input
mode or HDMI input mode is selected, the
MONITOR OUT output terminals (- page 30)
output audio signal only.
• If a REGZA-LINK device is connected to an
HDMI input, the REGZA-LINK icon will appear.
• When the TV is switched on, it will take a few
minutes for the REGZA-LINK icon to appear in
the list; when an HDMI cable is removed, it will
or to
take a few minutes for the icon to disappear.
• If the HDMI cable from connected device is
changed or HDMI device setting are changed,
Enable REGZA-LINK in the REGZA-LINK
menu may need to be reset to On.
Setting the manual setting menu
1
Press MENU, then press
the SET UP menu.
or to
SET UP
2
Press
press Q.
3
Press
press
below.
A. Colour system
Confi rm that colour system is set to "A"
(Auto). If not, select "A" with
Language
Auto tuning
Manual tuning
Manual setting
AV connection
PC Setting
Picture position
Quick Setup
Location
or to select Manual setting, then
or to select an item, and then
or to select the item as shown
Manual setting
Colour system : Auto
EXT1
A
A B
or to display
English
Home
or .