Turning The Tv On; Tuning The Tv For The Fi Rst Time - Toshiba 40VL20 Series Owner's Manual

Turning the TV on

Switching on the TV
Connect the power cord to a wall outlet, the !
power indicator lights in red (standby mode).
1
on the remote control or ! on the TV
Press
left side panel, the ! power indicator lights in
green.
Note:
If you watch black and white programmes when the
Colour System mode is set to Auto, colour noise
may appear on the screen. In this case select the
appropriate Colour System (For the system of each
country or region, refer to pages 14, 56).
Switching off the TV
1
Press on the remote control or the Touch
Keys on the TV left side panel to switch to the
standby mode.
Notes:
• When the TV will not be used for a long period of
time, such as during vacation or travel, remove the
power plug from the wall outlet.
• If power is cut off while you are viewing the TV,
the Last Mode Memory function turns on the TV
automatically when power is applied again. If power
is going to be off for a long time and you are going
to be away from your TV, unplug the power cord to
prevent the TV from turning on in your absence.

Tuning the TV for the fi rst time

Before switching on the TV, put your decoder and
media recorder to standby, if they are connected,
and ensure that the aerial is connected. To setup
the TV, use the buttons on the remote control as
detailed on page 10.
1
Press . The Menu Language screen will
appear. This screen will appear the fi rst time
that the TV is switched on.
Menu Language
2
Press , , or
Language (English, Chinese (CS), Malay, Thai,
Vietnamese, Russian, Arabic, Persian or French).
Introduction / Getting started
to select the Menu
3
Press Q, to display the Location menu
(- page 15).
Press or to select Store or Home. For
normal home use, select Home.
Location
To use the TV for displaying in a store showroom,
please select [Store]. [Home] mode is
recommended for normal use.
Store mode:
• A confi rmation menu will appear.
• AutoView menu is not available.
4
Press Q to display the AutoView menu
(- page 17).
Press or to select Yes or No.
AutoView
AutoView mode automatically adjusts picture settings to suit ambient
light conditions. Do you wish to enable AutoView mode?
5
Press Q to display the Auto Signal Booster
menu (- pages 14), and then press
select Yes or No.
Auto Signal Booster
Signal Booster boosts weak analogue broadcast signals.
If you select [Yes], the TV will automatically set this feature
to [On] or [Off] according to signal strength.
Do you wish to enable automatic control?
Yes mode :
This function performs automatic distinction of
On or Off .
6
Press Q to display the Auto Tuning startup
screen. Press Q to start the automatic search.
Auto Tuning
Progress
1%
7
When the automatic search is completed, the
TV will automatically return to 1 position and
appear the position list on the screen.
Note:
The Quick Setup menu can also be display at any
time from the SETUP menu.
Home
No
or to
Yes
Found
11