Selecting The Pc/Hdmi 3 Audio Mode - Toshiba 40VL20 Series Owner's Manual

Led lcd tv

Hide thumbs

Table Of Contents

Table of Contents

Connecting an HDMI or a DVI device

The HDMI input on your TV receives digital audio

and uncompressed digital video from an HDMI

device and uncompressed digital video from a DVI

device.

This input is designed to accept HDCP programme

material in digital from CEA-861-D compliant

consumer electronic devices (such as a set top box

and DVD player with HDMI and DVI output).

The HDMI input is designed for best performance

with 1080i (50 Hz/60 Hz) and 1080p (24/50/60 Hz)

high-defi nition video signals, but will also accept

and display 480i, 480p, 576i, 576p, and 720p

(50 Hz/60 Hz) and VGA (VESA 640 × 480 @ 60/72/75

Hz) signals.

• HDMI: High-Defi nition Multimedia Interface

• DVI: Digital Video Interface

• HDCP: High-bandwidth Digital Content Protection

• CEA-861-D compliance covers the transmission of

uncompressed digital video with high-bandwidth

digital content protection, which is being

standardized for reception of high-defi nition

video signals. Because this is an evolving

technology, it is possible that some devices may

not operate properly with the TV.

• Acceptable PC signal format:

• S-VGA: VESA 800 5 600 @ 56/60/72/75 Hz

• XGA: VESA 1024 5 768 @ 60/70/75 Hz

• W-XGA: VESA 1280 5 768 @ 60/75 Hz

• W-XGA: VESA 1360 5 768 @ 60 Hz

• S-XGA: VESA 1280 5 1024 @ 60/75 Hz

However, these signal formats are converted to

match the number of pixels of the LCD panel.

Therefore, the TV may not display small text

properly.

If you connect this unit to your PC, the compressed

image is displayed in S-XGA mode, therefore the

picture quality may deteriorate and characters may

not be read.

• L-PCM: Linear-Pulse Code Modulation.

• Supported Audio format: L-PCM, Dolby Digital,

sample rate 32/44.1/48 kHz

Connecting an HDMI device

One HDMI cable (type A connector)

For proper operation, it is recommended that you

use a short HDMI cable.

HDMI cable transfers both video and audio.

Connecting your TV

TV side view

HDMI device

Connecting a DVI device

One HDMI (type A connector)-to-DVI adapter cable

and audio cables.

HDMI (type A connector)-to-DVI adapter cable

For proper operation, the length of an HDMI-to-

DVI adapter cable should not exceed 3m. The

recommended length is 2m.

Standard analogue audio cables

An HDMI-to-DVI adapter cable transfers only video.

Separate analogue audio cables are required.

TV back view

DVI device

VIDEO