Toshiba 40VL20 Series Owner's Manual page 22

Activating the 4:3 Stretch
When 4:3 stretch is activated, this function will
switch 4:3 format programmes into a full screen
picture.
1
From the Display Settings menu, press
to select 4:3 Stretch.
2
Press or to select On or Off .
Note:
This feature is not available when Auto Format is set
to Off .
Panel Lock
Panel Lock disables the buttons on the TV. All
buttons on the remote control can still be used.
1
From the PREFERENCES menu, press
select Panel Lock.
2
Press or to select On or Off .
Note:
When Panel Lock is On, a reminder will appear when
the keys on the TV are touched. If the standby key is
touched, the TV will switch off and can only be brought
out of standby by using the remote control.
Setting the Automatic Power Down
The TV will automatically turn itself off (standby)
after approximately 4 hours, if you do not operate
the control buttons on the remote control or on the
TV control panel.
1
From the PREFERENCES menu, press
until Energy Saving Settings is selected, and
then press Q.
2
Press or to select Automatic Power
Down, press or
then press EXIT.
Note:
1 minute before switching to standby, a warning
message will appear.
Setting No Signal Power Down
The TV will automatically turn itself off after 15
minutes when no signal is detected. You can change
the setting to Off for the following purposes:
• Low signal strength of analog channel (no signal
detection).
• Only Audio L/R is connected to an external
input in order to listen to music through the TV
speakers.
1
From the Energy Saving Settings menu, press
Q.
22
Using the TV's features
or
or
or
to select On or Off , and
2
Press or
and press Q.
3
Press or
change and press
Notes:
• Default setting is all On.
• A warning message will appear 1 minute before
turning off .
Viewing the Software Licences
The licences for the software used in this TV are
available for viewing on screen.
1
From the SETUP menu, press
Software Licences.
2
Press Q.
to
A screen will appear displaying all of the
licencing information required for the TV's
software.
Confi rming software version
1
From the SETUP menu, press
System Information.
2
Press Q to display the software version.
System Information
Xxx XX 2012 - XX.X.XX.X
MBOOT Version : XXXXXXXX
Note:
The software version displayed is just for the
illustration.
Resetting the TV
Reset TV will reset all TV settings, including stored
channels, to their original factory values.
1
From the SETUP menu, press
Reset TV.
SETUP
Auto Tuning
Manual Tuning Auto Tuning
Quick Setup
Manual Tuning
Location Quick Setup
Software Upgrade
Location
Software Licences
System Information
Reset TV
2
Press Q to select.
to select No Signal Power Down
to select the item you want to
or to select On or Off .
or to select
or to select
TOSHIBA
2012
MFC Version : XXXXXX
or to select
Home
Home