Sound Adjustment - Toshiba 40VL20 Series Owner's Manual

4
Press Q, then press
you want to adjust.
Base Colour Adjustment
Hue
Red 0
Green 0
Blue 0
Yellow
0
0
Magenta
Cyan 0
Reset
5
Press , then press
Saturation or Brightness.
6
Press or to adjust the settings as required.
Hue
Red 0
Note:
If you select colour management Off mode, this mode
is not available.
Resetting the Base Colour Adjustment
The reset function adjusts the base colour
adjustment to the factory settings.
1
From the Base Colour Adjustment menu, press
or to select Reset.
2
Press Q.
Using the Active Backlight Control
In order to improve screen visibility, the Active
Backlight Control sets the screen brightness
automatically during dark scenes.
1
From the Advanced Picture Settings menu,
press or to select Active Backlight
Control.
2
Press or to select On or Off .
Activating Auto Brightness Sensor
When the Auto Brightness Sensor is activated, it
will automatically optimise the backlighting levels
to suit ambient light conditions.
1
From the Advanced Picture Settings menu,
press or to select Auto Brightness
Sensor.
2
Press or to select On or Off .
Resetting the Advanced Picture Settings
This feature allows you to reset the current Advanced
Picture Settings to the default values.
Using the TV's features
or to select an item
Saturation Brightness
0 0
0 0
0 0
0 0
0 0
0 0
or to select Hue,
Saturation Brightness
0 0
1
From the Advanced Picture Settings menu,
press or until Reset is selected.
2
Press Q.

Sound adjustment

Setting the MTS (Multi-channel TV Sound)
Auto mode
The MTS Auto mode automatically recognize stereo/
bilingual programmes depending on the broadcast
signal.
1
Press MENU, and then press
the SOUND menu.
SOUND
MTS
Dual
Balance
Advanced Sound Settings
Stable Sound
Dynamic Range Control
2
Press or to select MTS, and then press
or to select Auto or Mono.
Mono mode
If you experience noise or poor reception of any
stereo/bilingual programme, set the MTS mode to
Mono.
Noise will be reduced and reception may improve.
Note:
If you experience noise with a particular programme
on whose channel reception is usually good, try setting
MTS mode to Auto, then switch g to e Mono
(monaural).
Selecting the Dual 1 or Dual 2 mode
You can hear only Dual 1 or Dual 2 sound selected,
whenever bilingual programmes are received.
1
Press MENU, and then press
the SOUND menu.
2
Press or to select Dual, and then press
or to select Dual 1 or Dual 2.
Notes:
• When the MTS setting is in Mono mode, the Dual
menu is not selectable.
• The Dual menu setting status remains even if the TV
is turned off .
or to display
Auto
Dual 1
0
Off
On
or to display
19