Installation; Mechanical; Outdoor Use - Siemens RB500 Installation Manual

12

Installation

Mechanical

Please mount the reader at a suitable height also
catering for disabled persons.
1. Open the reader with the key supplied. The
lock is located beneath the keypad.
2. Fasten the back plate against the wall, using
three screws , and  according to figure
1. Seal the screw and cable holes with sealant
if the reader is externally mounted.
3. Make sure the back plate is earthed. Use a
separate cable to the earthing point. Make
sure the front and back plates are connected
with an insulated cable.
4. Fit the front and check that the reader is se-
curely fastened.

Outdoor use

When RB500 is mounted outdoor the protection
cover SH2 must be used.
RB500 Installation Guide