The reader is designed to be surface mounted.
If the reader should be mounted directlyonto condictive materials, such as metal
surfaces, metal frames (reinforcement) or metal-plated surfaces, this will reduce,
more or less, the readers read range.
The distance between readers of the same design should not be less than 30 cm.
Before final installation, the planned installation site should be checked for
You can tell the direction of the bottom section of the housing from the inscription
". The arrow must point upwards!
Figure 1: Installation direction
Operating instructions card reader AR6331-CP / AR6332-CP
Order no.: A24205-A335-H050