Operator Logo; Screen Saver; Display Brightness - Nokia 6100 User Manual

Operator logo

To set your phone to display or hide the operator logo, press Menu, and selectSettings, Display settings
and Operator logo.
Note that the operator logo is not displayed when the phone activates the screen saver.
For more information and availability of an operator logo via SMS, MMS or WAP, contact your network
operator and/or WAP service provider, and see also PC Suite on page 120.

Screen saver

Digital clock screen saver is used for power saving in standby mode. It is activated when no function of
the phone has been used for a certain time. Press any key to deactivate the screen saver. Screen saver is
also deactivated when the phone is out of the network coverage area.
Press Menu, and select Settings, Display settings and Screen saver timeout. Select the timeout after
which the digital clock display will be activated. The length of the timeout can vary from 5 seconds to
60 minutes.
Note that the screen saver overrides all the graphics and texts on the display in standby mode.

Display brightness

You can change the display contrast level used on the phone display.
Press Menu, and selectSettings, Display settings and Display brightness. Scroll with and to
decrease and increase the contrast level, and press OK to accept it.
Copyright © 2002 Nokia. All rights reserved.
79