Connectivity (Menu 11); Infrared - Nokia 6100 User Manual

■

Connectivity (Menu 11)

Infrared

You can set up the phone to receive data through its infrared (IR) port. To use an IR connection, the
device with which you want to establish a connection must be IrDA compliant. You can send or receive
data such as business cards and calendar notes to or from a compatible phone or data device (for
example, a computer) via the IR port of your phone.
Do not point the IR (infrared) beam at anyone's eye or allow it to interfere with other IR devices. This device is a
Class 1 Laser product.
Note: Your phone must be switched on to use this function. Do not switch the phone on when wireless
phone use is prohibited or when it may cause interference or danger.
Sending and receiving data via IR
• Ensure that the IR ports of the sending and receiving devices are pointing at each other and that
there are no obstructions between the devices. The preferable distance between the two devices in
an infrared connection is 60 cm (24 inches) at most.
• To activate the IR port of your phone to receive data via IR, press Menu, and select
Infrared.
• The user of the sending phone selects the desired IR function to start data transfer.
If data transfer is not started within two minutes after the activation of the IR port, the connection is
cancelled and has to be started again.
Copyright © 2002 Nokia. All rights reserved.
Connectivity and
102