Settings When Gsm Data Is The Selected Data Bearer - Nokia 6100 User Manual

3. Scroll to the set you would like to activate and press Activate.
4. Select Edit active service
Select each of the following service settings one by one and key in all the required settings.
• Settings' name
• Homepage - Key in the homepage address of the WAP service that you want to use, press
for a dot, and press OK.
• Session mode - Select
• Connection security
When the connection security is On, the phone tries to use a secure connection with the WAP
service. If a secure connection is not available, the connection will not be made. If you wish to
connect anyway, with a non-secure connection, you must set the connection security to Off.
• Data bearer - Select
data is the selected data bearer and Settings when GPRS is the selected data bearer below.
For pricing, connection speed and other information, contact your network operator or service
provider.

Settings when GSM data is the selected data bearer

• Dial-up number - Key in the phone number and press OK.
• IP address - Key in the address, press
your network operator or service provider.
• Authentication type
• Data call type - Select
settings.
- Key in the new name for the connection set and press OK.
Permanent or Temporary.
- Select On or Off.
GSM data or GPRS. Settings for the selected bearer, see Settings when GSM
- Select Secure or Normal.
Analogue or ISDN.
for a dot, and press OK. You obtain the IP address from
Copyright © 2002 Nokia. All rights reserved.
107