Settings When Gprs Is The Selected Data Bearer - Nokia 6100 User Manual
Hide thumbs
Also See for 6100:
- User manual (193 pages) ,
- Manual (52 pages) ,
- Manual d'utilisation (19 pages)
Table of Contents
Advertisement
•
Data call speed
- Select the speed you want to use, or select Automatic.
if the current selected data call type is Analogue. The actual data call speed depends on the service
provider.
•
Login type
- Select
•
User name
- Key in the user name and press OK.
•
Password
- Key in the password and press OK.
Settings when GPRS is the selected data bearer
•
GPRS access point
An access point name is needed to establish a connection to a GPRS network. You obtain the access
point name from your network operator or service provider.
•
IP address
- Key in the address, press
your network operator or service provider.
•
Authentication type
•
Login type
- Select
and password keyed in the following settings. If you select Manual, the login information is
required when establishing a connection.
•
User name
- Key in the user name and press OK.
•
Password
- Key in the password and press OK.
Manual
or Automatic.
- Key in the access point name and press OK.
- Select
Secure
or Normal.
Manual
or Automatic. If you select Automatic, the login type uses the user name
for a dot , and press OK. You obtain the IP address from
Copyright © 2002 Nokia. All rights reserved.
Automatic
is available only
108
Advertisement
Table of Contents
