Operator logo
To set your phone to display or hide the operator logo, press Menu, and
select Settings,
Display settings
Display brightness
To change the display contrast level used on the phone display, press
Menu, and select Settings,
Display settings
and to adjust the contrast level.
Tone settings
You can change the settings of the selected active profile.
Press Menu, and select
Settings
Incoming call
alert,
Ringing
alert,
Vibrating
alert,
Message alert
tones. You can find the same settings in the
(Menu 4) on page 32.
Select
Alert for
to set the phone to ring only upon calls from phone
numbers that belong to a selected caller group. Scroll to the caller group
you want or
All calls
and press Mark.
Enhancement settings
This menu is shown only if the phone is or has been connected to some
compatible Nokia audio enhancements, for example to a headset.
Press Menu, and select
Settings
of the displayed enhancements.
Select
Default profile
to select the profile the phone uses when the
enhancement is connected.
Select
Automatic answer
to set the phone to automatically answer an
incoming call after five seconds. If the
once
or Off, automatic answer will not be available.
Select
Lights
to set the lights permanently On. Select
the lights on for 15 seconds after a keypress. The
available only when
Handsfree
U s i n g t h e m e n u
and
Operator
logo.
and
Display
and
Tone
settings. Select and change
tone,
Ringing
volume,
Rhythmic backlight
tone,
Keypad tones
and
Profiles
menu, see Profiles
and
Enhancement
settings. Select one
Incoming call alert
Automatic
Lights
is selected.
brightness. Use
Warning
is set to
Beep
to set
option is
37