Settings when GPRS is the selected data bearer
•
GPRS connection
- Select
If you select
Always
switch the phone on. Starting a WAP or PC dial-up application creates the connection between
phone and network and data transfer is possible. When you end the application, GPRS connection is
ended but the registration to the GPRS network remains.
If you select
When
and closed when you end the WAP connection.
•
GPRS access point
An access point name is needed to establish a connection to a GPRS network. You obtain the access
point name from your network operator or service provider.
•
IP address
- Key in the address, press
from your network operator or service provider.
•
Authentication type
•
Login type
- Select
Always
online, the
•
User name
- Key in the user name and press OK.
•
Password
- Key in the password and press OK.
Making a connection to a WAP service
Firstly, make sure that the service settings of the WAP service you want to use are activated. To
activate the settings:
Always online
online, the phone is automatically registered to a GPRS network when you
needed, the GPRS connection is established when you connect to a WAP service
- Key in the access point name and press OK.
- Select
Secure
or Normal.
Manual
or Automatic. If you select
Always online
connection will be disabled.
©2002 Nokia Corporation. All rights reserved.
or
When
needed.
for a period, and press OK. You obtain the IP address
Manual
when the
GPRS connection
is set to
83