Settings When Gprs Is The Selected Data Bearer; Making A Connection To A Wap Service - Nokia HDS 3 - Headset - Ear-bud User Manual

Settings when GPRS is the selected data bearer

• GPRS access point - Key in the access point name and press OK.
An access point name is needed to establish a connection to a GPRS network.
You obtain the access point name from your network operator or service
provider.
• IP address - Key in the address, press
the IP address from your network operator or service provider.
• Authentication type
• Login type - Select Manual
type uses the user name and password keyed in the following settings. If you
select Manual, the login information is required when establishing a
connection.
• User name - Key in the user name and press OK.
• Password - Key in the password and press OK.

Making a connection to a WAP service

Firstly, make sure that the service settings of the WAP service you want to use are
activated. To activate the settings:
• Press Menu, and select
scroll to the set you want to activate and press Activate.
Copyright
for a dot , and press OK. You obtain
- Select Secure or Normal.
or Automatic. If you select Automatic, the login
Services and Settings. Select
‹
2003 Nokia. All rights reserved.
Active service settings and
119