Main Menu; Settings - Proceq Pundit PL-200PE Operating Instructions Manual

• A complete charge requires <9h (Instrument not operating).
• Charging time is much longer if the instrument is in use.
• An optional quick charger (Part No. 327 01 053) can be used to charge
a spare battery outside of the instrument. In this case it takes <4h for
a complete charge.
Energy Saving
Energy saving, time to dim display and time to turn off display, may be
programmed as desired under System/Power settings.
Connecting the transducer
(D)
Connect the Pulse Echo Transducer (C) to the Pundit Touchscreen (A)
using the Pulse Echo Cable (D).
Buttons
Lift the protective visor.
The upper right of the screen there are three buttons 2 (see page 3).
Power On/Off – Press to power on. Press and hold to power off.
Soft Key – Switches in and out of full screen view.
Back Button – Returns to previous screen.
© 2014 Proceq SA
3.2

Main Menu

On start up the main menu is displayed. All functions may be accessed
directly via the touchscreen. Return to the previous menu by pressing the
back button or the return icon (arrow) at the top left of the touchscreen.
Measurement: Application specific measurement screen.

Settings:

For application specific settings.
Explorer: File manager functionality for reviewing measure-
ments saved on the instrument.
System:
For system settings, eg. language, display options,
power saving
Information: For device information.
Exit: Power Off.
3.3 Settings
Scroll up and down the screen by dragging your finger up or down the
screen. The current setting is displayed on the right hand side. Tap on an
item to adjust it.
transducer
Connected Transducer
If a Pulse Echo Transducer is connected this will be recognized automati-
cally.
Test Transducer
Each individual dry contact transducer can be tested for correct func-
tionality.
The graphic on the right hand side of the screen indicates which trans-
ducer pair is to be tested (blue highlight). Press the Pulse Echo Contact
7