Clock Adjustment - Kenwood DP-SE9 Instruction Manual

44

Clock adjustment

This unit incorporates a clock function. Be sure
to adjust the correct time before using the timer
function.
Ensure that the power is OFF.
1
Activate the clock adjustment mode.
2
Enter the hour.
1
To decrease
the figure
2
3
Enter the minute.
1
To decrease
the figure
2
auto/mono
multi control
To increase
the figure
enter
multi control
To increase
the figure
enter
Example: Adjustment to 8:45
A M
÷ The time display starts to blink.
A M
÷ The time of the day is represented in 12-hour AM/PM
method.
÷ Press the "enter" key. The hour is entered and the
minute display starts to blink.
A M
÷ If you make a mistake, restart from the beginning.
÷ To adjust correct time, press the "enter" key at the same
moment as a time announcement.
÷ The time display blinks after a power failure or when the
power cord has been unplugged from the AC outlet and
plugged again. In such a case, adjust the clock again.
R-SE9T/DP-SE9/X-SE9 (En)
R-SE9T
1 2 ) ) :
R-SE9T
8 ) ) :
R-SE9T
8 4 5 :