Collective Presetting Of Stations (Auto Preset); One-By-One Presetting (Manual Preset); R-Se9T/Dp-Se9/X-Se9 (En - Kenwood DP-SE9 Instruction Manual

Collective presetting of stations (auto preset)

1 Receive a FM broadcast.
2 Keep the "enter" key depressed (for 2 sec or
more).
During recording, the indica-
tor "A MEMO" flashes.

One-by-one presetting (manual preset)

1 Press the "enter" key during reception.
Presetting is cancelled when no
operation is executed for 5 sec-
onds or more.
2 Select one of the preset numbers from 1 to 40.
Presetting is cancelled when
no operation is executed for 5
seconds or more.
3 Press the "enter" key again.
AUTO
F M
"TUNING" appears (for approx. 5 sec.)
T U N I N G
Lights during stereo reception
AUTO ST. TUNED
F M
The "TUNED" indicator lights
when a station is received.
÷ When a key is held depressed, preset stations will be
skipped at an interval of about 0.5 second.
÷ Preset calls also can be made by numerical input via the
numeric keys on the remote control. When the key for
the tens digit has been pressed erroneously at the time
of input, press the +10 key several times to return to the
original display and then enter the number again.
enter
enter
multi control
enter
R-SE9T
8 8 ) ) .
MHz
R-SE9T
Frequency display
R-SE9T
8 9 ) ) .
MHz
÷ Up to 30 stations can be memorized.
÷ For use of the RDS function, stations must be memo-
rized by RDS auto presetting.
÷ RDS stations are given priority during auto presetting. If
there is memory left after presetting, the receiver contin-
ues presetting regular FM stations.
AUTO
A M E M O
÷ For memorizing of stations other than RDS stations (FM,
AM), memorize the stations according to chapter "One-
by-one presetting (manual preset)".
"MEMO." lights (for approx. 5 sec.)
AUTO ST. TUNED
) -
AUTO ST. TUNED
) 3
÷ Repeat steps 123 to preset other stations.
÷ If several stations are preset under the same number, the
previous memory is replaced with the latest memory
contents.
Select the tuning mode.
auto/mono
Each press alternates the mode.
1"AUTO" lit (Auto tuning)
2"AUTO" not lit (Manual
Use the manual tuning mode when reception is
noisy due to weak reception. (In the manual mode,
stereo broadcasts are received in monaural.)
÷ Normally, use the AUTO (Auto tuning) mode.
About display change during tuner reception
The display will change each time the DISPLAY
key is pressed.
1Reception band/Frequency
2Preset number/Frequency
3Clock
The display will change each time the RDS
DISPLAY key is pressed.
1 PS (Program Service Name) Display
2Reception band/Frequency
Hearing sound

R-SE9T/DP-SE9/X-SE9 (En)

8 9 ) ) .
MEMO.
MHz
Goes off
8 9 ) ) .
MHz
tuning)
27