Compensating For The Bass And Treble Tones - Kenwood DP-SE9 Instruction Manual

Compensating for the bass and treble tones

Compensation by adjusting the bass and treble levels
Use the multi control knob. ...
Compensation by applying the preset compensation levels
Use the EX. BASS function. ...
To adjust the multi control
During tuner reception
1 Each press switches the display.
mode
2 Press the MODE key while "TUNING" is dis-
played.
To enter BASS adjustment mode: Display "BASS".
To enter TREBLE adjustment mode: Display "TREBLE".
3 While "BASS" or "TREB" is displayed, turn
the multi control to set to the desired level.
multi control
During playback of a CD, etc.
(in other modes than TUNER mode)
1 Press the MODE key repeatedly.
mode
Enter the BASS mode or TREBLE
mode.
2 Perform the same operation as step 3 in
"During tuner reception".
To compensate using the EX.BASS function
Turn EX.BASS on.
EX. BASS
The levels of the bass and treble tones can be set independently.
The levels of the bass and treble tones are enhanced by the preset levels.
The bass level enhancement is effective in listening at a low
volume. The treble level is enhanced to a predetermined level
regardless of the current volume setting.
1SELECTOR
2TUNING
3BASS
4TREBLE
Lights.
EX. BASS
Be sure to turn EX.BASS off before this adjustment.
R-SE9T
T U N I N G
R-SE9T
B A S S
÷ Both BASS and TREBLE can be adjusted in the range
between -10 and +10.
÷ The BASS level set by the multi control is applied to the
current N.B. (Natural Bass) boosting to enhance it further.
÷ Turning EX.BASS on switches off the N.B. (Natural Bass)
boosting automatically.
÷ Turning EX.BASS on replaces the levels set using the multi
control with the level preset with the EX.BASS function.
÷ Turning EX.BASS off recalls the bass and treble levels set
with the multi control.
÷ Pressing the switch in the EX.BASS mode returns to the
normal mode and the EX.BASS indicator goes off.
43
R-SE9/DP-SE9/X-SE9 (En)
Displayed for 5 sec.
Displayed for 5 sec.
+ 1 )