Use; Loading The Pellets - Piazzetta P937 Installation, Use And Maintenance Manual

6.0 USE

• Do not use the stove as a cooking appliance.
• Ensure that the room in which the stove is installed is sufficiently well ventilated (fresh air intake).
• Ensure that all joints in the flue are hermetically sealed using a silicone (not cement-based) sealant which is resistant to heat (250°C) and which
shows no sign of deterioration.
• Check (or have checked) regularly that the smoke outlet is clean.
• Under no circumstances use fuel other than pellets.
• Remove any deposits of unused pellets left by failed ignition before restarting the stove.
a
Some parts of the stove (door, handle, controls, ceramic parts) may reach extremely high temperatures during operation. Take great
care and all necessary precautions, especially in the presence of children, the elderly or disabled, or pets.
Keep any inflammable objects well away from the stove while it is in use (MINIMUM: 80 cm from the front panel).
While in use the door must remain closed and the glass must be present and intact.
The removal of the protective grille inside the pellet hopper is strictly prohibited.
If topping up with pellets while the stove is lit, ensure that the bag does not come into contact with the hot surfaces.

6.1 LOADING ThE pELLETS

• In order to load pellets into the tank, we recommend removing the
bag flap opening and emptying it into the tank. This way, the loading
operation is easier and you avoid spilling the pellets over the appliance.
a
Do not allow the build-up of residue at the bottom of the tank.
a
When loading pellets make sure that they do not spill out of
the tank and fall inside the stove because it could ignite when
in contact with hot parts.
24
Fig. 48
H072043UK0 / DT2001455 - 00
Fig. 49
DT2030459-01
DT2012055-00
DT2010035-06
DT2010730-00
DT2030460-01