Clock Button; Turbo Button; Quiet Button; X-Fan Button - Toyotomi TAG-A16 HDI Service Manual

Note: Besure that there are no obstructions between receiver and remote controller;
Don't drop or throw the remote control; Don't let any liquid get into remote controller and
put the remote controller directly under the sunlight or any place where is very hot.
Remote control
CLOCK

CLOCK button

●
Press this button, the clock can be set up,
signal blink and display.Within 5
seconds, the value can be adjusted by
+
pressing
press this button for 2 seconds above,
in every 0.5 seconds, the value on ten place
of Minute will be increased 1. During blinking,
repress the Clock button or Confirm button,
signal will be constantly displayed and
it denotes the setting succeeded. After
powered on, 12:00 is defaulted to display
and signal
signal be displayed that denotes the
current time value is Clock value, otherwise
is Timer value.
LIGHT
LIGHT button
●
Press this button at unit on or off status,
Light on and light off can be set up.
After powered on, Light on is defaulted.
TURBO

TURBO button

Under Cool or Heat mode,press this
●
button can turn on or turn off the Turbo
function.After the Turbo function turned
on, the signal of Turbo will display. The
signal will be automatically cancelled if
changing the mode or fan speed.
-
or button, if continuously
will be displayed. If there is
X-FAN

X-FAN button

●
Pressing X -FAN button in COOL or DRY
mode,the icon
indoor fan will continue operation for 10
minutes in order to dry the indoor unit
even though you have turned off the unit.
After energization, X-FAN OFF is defaulted.
X-FAN is not available in AUTO,FAN or
HEAT mode.
+
+
button
●
Presetting temperature can be increased.
Press this button,the temperature can be
set up, continuously press this button
and hold for two seconds, the relative
contents can quickly change,until unhold
this button and send the order that the
o
( F) signal will be displayed all the time.
The temperature adjustment is
under the Auto mode, but the order
be sent by if pressing this button.
Temperature of Celsius degree setting:
16-30 ; for Fahrenheit degree setting:
61-86.
-
-
button
●
Presetting temperature can be decreased.
Press this button, the temperature can be
set up, continuously press this button
and hold for two seconds, the relative
contents can quickly change,until unhold
this button and send the order that the
o
( F) signal will be displayed all the time.
The temperature adjustment is unav-
ailable under the Auto mode,but the order
can be sent by if pressing this button.
QUIET

QUIET button

● Press this button,the Quiet status is
under the Auto Quiet mode (display
" " and "Auto"signal ) and Quiet mode
(display " " singal) and Quiet OFF
(there is no signal of "
after powered on,the Quiet OFF is
defaulted. Note: the Quiet function
cannot be set up in Fan and Dry mode;
Under the Quiet mode (Display "
signal), the fan speed is not available.
is displayed and the
unavilable
can
" displayed),
"