Names And Functions Of Every Button Of The Remote Control - Toyotomi TGS-28FWCA Owner's Manual

Remote controller operation procedure

Names and functions of every button of the remote control

The remote control of the Ducked type indoor unit is shop piece.
NOTE!
● Make sure that there is no obstruction between the remote control and the signal receptor.
● The remote control signal can be received at the distance of up to about 10m.
● Don't drop or throw the remote control.
● Don't let any liquid flow into the remote control.
● Don't put the remote control directly under the sunlight or any place where is very hot.
SWING button
the guide louver swings
according to certain
angle when press once;
repress once to stop
operating.
TEMP. button
Set temp. increases 1 c
by pressing "+" and
decreases 1 c by pressing
"-" once.
Set temp. : 16 c~30 c
Set temp. : 16 c~30 c
Set temp. : 16 c~30 c
Set temp. : 16 c~30 c
MODE button
Press the button to change
the mode according to the
following order
NOTE: The cooling only
units have no mode.
NOTE!
After every indoor unit received the turn off signal, the fan and electric inflate valve will continue to
work for 20-70mins to make use of the rest cool or rest heat, while for preparation for the nest work. And
this is normal phenomenon.
SWING FAN
AUTOFAN
OPER
AUTO
AIR
SWING HUMID LIGHT SAVE
TIMER
HR.
ONOFF
MODE
ON/OFF
20
FAN button
Press the button to
change the speed of the
fan according to the
following order.
AUTO FAN SPEED
COOL
DRY
FAN
HEAT
ON/OFF button
Press the button to turn on
the unit. Press the button
once again to turn off the
unit and cancal the timer.