Guide For Operation; Introduction For Special Function; About Swing Up And Down; About Swing Left And Right - Toyotomi TAG-A16 HDI Service Manual

Guide for operation- general operation
1. After powered on, press ON/OFF button, the unit will start to run.
(Note: When it is powered on, the guide louver of main unit will close automatically.)
2. Press MODE button, select desired running mode.
+
-
3. Pressing or button, to set the desired temperature (It is unnecessary to set the temp.
at AUTO mode.)
4. Pressing FAN button, set fan speed, can select AUTO FAN, LOW, MEDIUM-LOW, MEDIUM,
MEDIUM-HIGH and HIGH.
5. Pressing and button, to select the swing.
Guide for operation- Optional operation
1. Press SLEEP button, to set sleep.
2. Press TIMER ON and TIMER OFF button, can set the scheduled
3. Press LIGHT button, to control the on and off of the displaying part of the unit (This
function may be not available for some units).
4. Press TURBO button, can realize the ON and OFF of TURBO function.

Introduction for special function

About X-FAN function
This function indicates that moisture on evaporator of indoor unit will be blowed after the unit is stopped to avoid mould.
1. Having set X-FAN function on: After turning off the unit by pressing ON/OFF button indoor fan will continue running
for about 10 min. at low speed. In this period, press X-FAN button to stop indoor fan directly.
2. Having set X-FAN function off: After turning off the unit by pressing ON/OFF button, the complete unit will be off directly.
About AUTO RUN
When AUTO RUN mode is selected, the setting temperature will not be displayed on the LCD, the unit will be in accordance
with the room temp. automatically to select the suitable running method and to make ambient comfortable.
About turbo function
If start this function, the unit will run at super-high fan speed to cool or heat quickly so that the ambient temp. approachs the
preset temp. as soon as possible.
About lock
+
-
Press and buttons simultaneously to lock or unlock the keyboard. If the remote controlleris locked, the icon
displayed on it, in which case, press any button, the mark will flicker for three times. If the keyboard is unlocked, the mark will
disappear.

About swing up and down

1. Press swing up and down button continuously more than 2s,the main unit will swing back and forth from up to down, and
then loosen the button, the unit will stop swinging and present position of guide louver will be kept immediately.
2. Under swing up and down mode, when the status is switched from off to
will switch to off status directly; if press this button again within 2s,the change of swing status will also depend on the
circulation sequence stated above.

About swing left and right

1. Press swing left and right button continuously more than 2s,the main unit will swing back and forth from left to right, and then
loosen the button, the unit will stop swinging and present position of guide louver will be kept immediately.
2. Under swing left and right mode, when the status is switched from off to
switch to off status directly; if press this button again within 2s,the change of swing status will also depend on the circulation
sequence stated above.
timer on or timer off.
, if press this button again 2s later,
, if press this button again 2s later,
4
1
2
3
5
4
2
3
1
will be
status
status will