Page 2
Products, LLC brands and product names are trademarks or registered trademarks of their respective companies. ADJ Products, LLC and all affiliated companies hereby disclaim any and all liabilities for property, equipment, building, and electrical damages, injuries to any persons, and direct or indirect economic...
Page 3
Dotz Panel 2.4 Introduction Unpacking: Thank you for purchasing the Dotz Panel 2.4 by ADJ Products, LLC. Every Dotz Panel 2.4 has been thoroughly tested and has been shipped in perfect operating condition. Carefully check the shipping carton for damage that may have occurred during shipping. If the carton appears to be dam- aged, carefully inspect your fixture for any damage and be sure all accessories necessary to operate the unit has arrived intact.
(R.A.) number. If the unit is under warranty you must provide a copy of your proof of purchase invoice. Please contact ADJ Products, LLC customer support for an R.A. number. ADJ Products, LLC - www.adj.com - Dotz Panel 2.4 User Manual Page 4...
3. The appliance has been exposed to rain or water. 4. The appliance does not appear to operate normally or exhibits a marked change in perfor- mance. ADJ Products, LLC - www.adj.com - Dotz Panel 2.4 User Manual Page 5...
Page 6
DMX-512 protocol. The Dotz Panel 2.4 has 5 DMX Channel Modes. The DMX address is set on the rear panel of the Dotz Panel 2.4. Your unit and your DMX controller require an approved DMX-512 110 Ohm Data cable for data input and data output (Figure 1). We recommend Accu-Cable DMX cables.
Page 7
3-pin line, a cable adaptor must be used. These adaptors are readily available at most electron- ics stores. The chart below details a proper cable conversion. ADJ Products, LLC - www.adj.com - Dotz Panel 2.4 User Manual Page 7...
Speed and Flash adjustable FLOW 8 Seven color chase Speed 00-99, Flash 00-99 Speed and Flash adjustable FLOW 9 Seven color chase Speed 00-99, Flash 00-99 Speed and Flash adjustable ADJ Products, LLC - www.adj.com - Dotz Panel 2.4 User Manual Page 8...
Page 9
2. 1 of 5 dimming curve settings will be displayed: Standard, Stage, TV, Architectural, or Theatre. Use the UP and DOWN buttons to select your desired dimming curve and press ENTER to con- firm. ADJ Products, LLC - www.adj.com - Dotz Panel 2.4 User Manual Page 9...
Page 10
Personality - This will let you set your unit as a Primary in a primary/secondary configuration. 1. Press the MENU button until “Personality” is displayed. Your unit will now be the Primary unit in a Primary-Secondary configuration. ADJ Products, LLC - www.adj.com - Dotz Panel 2.4 User Manual Page 10...
A DMX controller allows you to create unique programs tailored to your individual needs. The Dotz Panel 2.4 has 5 DMX channel modes; a 3 Channel Mode, 6 Channel Mode, 8 Channel Mode, 24 Channel Mode, & 29 Channel Mode. See the System Menu section of this manual for detailed instructions regarding how to select your desired channel mode.
When Channel 4 is being used between the values of 136-239, Channel 5 will control the speed of the programs. When Channel 4 is being used between the values of 240-255, Channel 5 will control sound sensitiv- ity. ADJ Products, LLC - www.adj.com - Dotz Panel 2.4 User Manual Page 15...
Page 19
When Channel 25 is being used between the values of 136-239, Channel 26 will control the speed of the programs. When Channel 25 is being used between the values of 240-255, Channel 26 will control the sound sensitivity. ADJ Products, LLC - www.adj.com - Dotz Panel 2.4 User Manual Page 19...
The installation should be checked by a skilled person once a year. The Dotz Panel 2.4 is fully operational in two different mounting positions: hanging upside-down from a ceiling or set on a flat level surface. To avoid internal damage to the unit, never mount the unit on its side.
Unit does not respond to sound: Quiet or high pitched sounds will not activate the unit. If problems are not resolved, please contact ADJ Products, LLC for service. ADJ Products, LLC - www.adj.com - Dotz Panel 2.4 User Manual Page 21...
Warranty MANUFACTURER’S LIMITED WARRANTY A. ADJ Products, LLC hereby warrants, to the original purchaser, ADJ Products, LLC products to be free of manufacturing defects in material and workmanship for a prescribed period from the date of purchase (see specific warranty period on reverse). This warranty shall be valid only if the product is purchased within the United States of America, including possessions and territories.
Need help?
Do you have a question about the Dotz Panel 2.4 and is the answer not in the manual?
Questions and answers