Security Perth Agility 3 User Manual page 44

Event Message
Comm OK Siren=y
Comm. OK GSM
Comm.OK I/O Mdl.
* Conf. alarm P=y

Conf. Hold-Up P=y
Confirm rs Z=xx
* Confirm Zone=xx
CP reset
Date set C=xx
* Day Away:P=y
Day disarm:P=y
* Day stay: P=y

Device Tmpr Byp
* Disarm:P=y C=zz
* Disarm: P=y KF=zz
Duress C=xx
Enter program
Exit Error Zn=xx
Exit program
False code
False restore
Fire Keypad=y
Fire main KP
Fire ok Zone=xx
Fire trbl Zn=xx
* Fire Zone=xx
Foil ok Z=xx
Foil Zone=xx
Forced P=y
Found Zone=xx
* Gas Alarm Zn=xx
Gas Rst. Zn=xx
GSM:IP OK
GSM:IP Trouble
GSM:Mdl comm.OK
Description
Communication OK between the Agility and Siren Y
Communication OK between the Agility and GSM
Communication OK between the Agility and I/O module
Confirmed alarm occurred in partition Y
Confirmed Hold-Up Alarm in partition Y
Restore zone confirmed alarm
Confirmed alarm occurred from zone XX
The control panel has reset
Date defined by user no. XX
Daily arm on partition Y
Daily disarm on partition Y
Daily STAY arming in partition Y
Device Tamper Bypass
Partition Y disarmed by user ZZ
Partition Y disarmed by remote control ZZ
Duress alarm from user no. XX
Entering installer programming from keypad or configuration
software
Exit error event from zone XX
The zone was left open at the end of the exit time
Exiting installer programming from keypad or configuration
software
False code alarm
False code alarm restore
Fire alarm from wireless keypad Y
Fire alarm from
Trouble restore in fire zone no. XX
Trouble in fire zone no. XX
Fire alarm in zone no. XX
Restore in foil (Day) zone no. XX
Trouble in foil (Day) zone no. XX
Partition Y is force armed
Wireless zone found, zone no. XX
Gas (natural gas) alert from zone XX defined as a gas detector
Gas (natural gas) alert restored from zone XX defined as a gas
detector
IP connection OK
IP address is incorrect
Communication between the GSM/GPRS Module and the Agility is
OK
Page 44
Agility 3 User Manual