Key
and 0 simultaneously
/
3.
Press
The series of characters is saved and assigned to the selected macro.
For example:
To arm partition 1 with the code 1234, enter the following sequence:
1
1 2 3 4
Activating a Macro
Hold 7/8/9 on the keypad for 2 seconds to activate the macro A/B/C respectively. A
confirmation message will be heard:
"[Macro X] activated".
4.6 Complete Menu of User Functions
The Agility comes with a variety of selectable user functions that become available when
you enter the User Functions mode. The following section lists these functions.
Note: Although these functions are in the User Functions menu, you can ask you installer
to program some of them for you.
To enter the User Functions mode press
The following table shows full Keypad Operations according to users.
√ - User is able to perform this function
- - User is unable to perform or see this function
Operation
Activities
Bypass Zone: Provides the ability to bypass any
of the system's intrusion zones.
Bypass zone Select zone Define [Y] using
the
key and press
Represents
Deletes your entry from the cursor position forward
Use to toggle between
numeric characters
Used to end the sequence and save it to memory
to save your entry.
Agility 3 User Manual
/ ///#/ and all of the
followed by your user code.
Grand
Master
√
Page 32
User
Installer
√
-