Table of Contents
Advertisement
Agility 3 User Manual
To listen in or talk:
1.
From the Operations/Acknowledge menu, press [6]. The following messages are
announced:
"To Listen In press 1, To Talk press [2], To Listen and Talk (Open channel) press
[3], To return to the previous menu, Press [
2.
Select the desired option.
3.
Press [
] to end listening in and talking communication and return to the
Operations menu.
Bi-directional Audio Options after an Alarm
In the event of Burglary, Fire and Medical alarms, the Agility is able to report these events
and then stay on the line. This allows the monitoring service to perform Voice Alarm
verification, verify the alarm or Verification in order to verify a cause of event or guide
someone in distress.
Service call
The Service Call feature enables you to call the Monitoring Station by pressing a key. To
establish the service call, press the button on the main unit or press simultaneously the
buttons
on the bi-directional keypad.
Note: The Service call should be defined by your installer.
3.2 SMS Operation
SMS Remote Control
The Agility enables you to perform remote control operations using simple SMS
commands. The following section describes the SMS commands and the response of the
system to these commands.
Note: This application is available only if a GSM/GPRS module is installed in your system.
Operation
Arm all partitions
of a user code
Arm all partitions
to Stay/Home
Arming
Disarm all
partitions of a user
code
Arm by partition
Stay/Home arm by
SMS Message Structure
[Code] A
[Code] H
[Code] D
[Code] A [Partition No.]
[Code] H [Partition No.]
Page 23
]."
Example
1234A
1234H
1234D
1234A1
1234H1
Advertisement
Table of Contents
