Appendix C - Installer Event Log Messages - Security Perth Agility 3 User Manual

Agility 3 User Manual

Appendix C - Installer Event Log Messages

Event Message
Activate UO=xx
Actv UO=xx KF=zz

AL Reinstate P=y
Alarm abort P=y
* Alarm Zone=xx
* Anti-code reset
Auto Add GSM
Auto Add IP card
Auto Add MODEM
Auto Del GSM
Auto Del IP card
Auto Del MODEM
Auto test fail
Auto test OK
* Away fail P=y
* Away:P=y C=zz
* Away:P=y KF=zz
* Bell tamper
Bell tamper rst
* Box tamper
Box tamper rst
* Bypass Box+Bell
Bypass code=xx
* Bypass Trbl C=xx
* Bypass Zone=xx
Cancel Alarm P=x
Change code=xx
Change FM=yy
Change tag=xx
Clock not set
Clock set C=xx
Cloud Connected " ,
Cloud Disconnect" , //
CO Alarm Zn=xx
CO Rst. Zn=xx
Com ok IP card
Description
UO XX activation
UO XX is activated from remote control ZZ
Alarm reinstatement on partition Y
Alarm aborted on partition Y
Alarm in zone no. XX
Remote reset
GSM Module added to the main unit
IP Module added to the main unit
Modem added to the main unit
GSM Module was removed from the main unit
IP Module removed from the main unit
Modem removed from the main unit
Failure of zone self-test
Automatic zone self-test OK
Partition Y failed to arm
Partition Y armed by user no. ZZ
Partition Y armed by remote control ZZ
Bell tamper alarm
Bell tamper alarm restore
Box tamper alarm from main unit
Box tamper alarm restore
Box + Bell tamper is bypassed
Bypass code XX has been used
System troubles were bypassed by user XX
Zone no. XX is bypassed
Cancel alarm event has occurred from partition X. A valid user
function is entered to reset the alarm after the defined Abort alarm
time
Changing user code XX
Changing Follow-Me number YY
Changing keypad tag for user XX
Time is not set
Time defined by user no. XX
Cloud communication channel is functioning
Cloud communication channel is not functioning
CO alert from zone XX defined as a CO detector
CO alert restored from zone XX defined as a CO detector
Communication OK between the Agility and IP card
Page 43