To arm using
Partition arming (Away or Stay) procedure
Quick mode:
High security mode:
Quick mode:
High security mode:
Press button or button 4 (if defined. Advise with your installer)
Send SMS: [Code][A or H] [Partition 1,2 or 3]. Example 1234A1. For more
information refer to page 23.
Force Arming:
Force arming arms the system regardless of open zones. Your installer must enable this
option.
Note: Force arming the system results in leaving part of the system unsecured.
Arming with troubles in the system
If required, and defined by your installer, all troubles in the system should be confirmed
to enable the arming operation while performing arming from the wireless keypad.
When trying to arm the system with troubles, the display will show a "System Troubles"
message. Press the
list to view all troubles in the system.
To enable one time arming from the keypad:
1.
Press
2.
Go to Activities > Bypass Trouble
3.
The following question will appear: "Bypass troubles. Are you sure? N?". Using the
key change to Y and press
4.
Press
/
/
/
key to view the troubles in the system. Scroll down the troubles
and enter your user code to access the user menu.
to return to main display and perform the arming operation again.
Agility 3 User Manual
/
>
/
>
/
/
/
>
/
/
/
>
to confirm.
Page 14
/
+ code
+ code or proximity tag