Partition Disarming; Duress Disarming - Security Perth Agility 3 User Manual

Partition disarming:

Partition disarming enables you to disarm individual partitions within an armed system
To disarm using

Duress disarming:

If you are ever coerced into disarming your system, you can comply with the intruder's
wishes while sending a silent duress alarm to the Central Station. To do so, you must
use a special duress code, which when used, will disarm the system in the regular
manner, while simultaneously transmitting the duress alarm. Confer with your installer
which of the user's codes is defined as a duress code.
Note: Under no circumstances must the duress code be used haphazardly or without
reason. Central Stations, along with Police Departments, treat duress codes very
seriously and take immediate action.
Enter your user code and click DISARM
Procedure for Partition Disarming
Quick mode:
/
High security mode:
>
/ /

Press the button. All partitions assigned to the button will be
disarmed.
Send SMS: [Code][D] [Partition 1,2 or 3]. Example 1234D1. For more
information refer to page 23.
Page 16
Agility 3 User Manual
/ >
/ / >
> code or proximity tag.
> Code