Acknowledge Menu; Bi-Directional Communication - Security Perth Agility 3 User Manual

Notes: If no voice is detected, the event message will start playing 5 seconds after phone
pick up. Press [#] to begin playback of the event message from the beginning.
To repeat the Event Announcement message press [#].
To bypass the Event Announcement message and go directly to the
Acknowledge menu, press [
3. Acknowledge the event. (See Acknowledge Menu)

Acknowledge Menu

After the Event Announcement message is made, the following list of options is
announced:
Operation
Acknowledge Message
Acknowledging an event means that you have received a message from
the security alarm system about a relevant event in the system and
want to confirm this. After you acknowledge an event, the system calls
the next FM number.
Acknowledge and stop all dialing
This option acknowledges the event and stops the system from calling
the next FM numbers to report the event.
Acknowledge and access the Operations menu
The Operations menu lists the available options for remotely operating
your system.
Listen In and Talk
This option enables you to perform bi-directional communication.
Repeat the event message
Repeat the Acknowledge menu
Note: If an invalid code is entered 3 consecutive times, the system hangs up and this FM
number is locked for 15 minutes and no calls are initiated to the FM number.
If a valid user code is not entered within 10 seconds, the system hangs up.

Bi-directional Communication

The Listen In and Talk options enable you to remotely and silently listen in to your
premises in order to verify the cause of an event occurrence, through the microphone or
remotely talk to your premises via the Agility loudspeaker, for example, to guide someone
in distress.
Agility 3 User Manual
].
*
Page 22
Digit
Press [1]
Press [2]
followed by
the code
Press [3]
followed by
the code
Press [6]
followed by
the code
Press [#]
Press [*]