Macro Keys - Security Perth Agility 3 User Manual

Agility 3 User Manual
5. Select the Scheduling program index number. Use the
deactivate and press

4.5 Macro keys

Programming Macro Keys
Agility enables the installer or Grand Master to record a series of commands and assign
them to a macro. When the macro is invoked, the recorded commands are executed from
beginning to end. Up to 3 macros can be programmed to a system using the Agility LCD
keypad or the Configuration Software.
Before programming a macro, it is recommended to perform your required series of
commands, making a note of every key you press while doing so.
Notes:
Macros cannot be programmed to perform disarming commands.
Macro keys are not available in the slim keypad

To program a macro:
1. In the Macro menu select a macro (A, B or C) and press
2. Enter the sequence of characters according to the following table:
Key
Press 1 twice
Press 3 twice
Press 4 twice
Press 6 twice
Press 7 twice
Press 9 twice
.
Represents
Used to enter numerical characters
Used to move the cursor to the left
Used to move the cursor to the right
Represents the  character
Represents the  character
Represents the key
Represents the key
Represents the  character
Represents the # character
Page 31
key to activate /
.