Chapter 2 - Local System Operation; Arming Your System; Away (Full) Arming - Security Perth Agility 3 User Manual

Chapter 2
- Local System Operation

2.1 Arming your system

Arming your system causes the intrusion detectors to trigger an alarm when violated. The
arming operation will be followed by a local message announcement (if defined).
Before arming the system check the
to be armed. If the system is NOT ready to be armed secure or bypass the violated zone(s),
and then proceed.
Failing to arm the system will be indicated by the system
Your Agility offers the following kinds of arming:
Note: If you are unable to arm the system, press the status key to view system messages.

Away (Full) arming:

Away arming prepares all of the system's intrusion detectors to activate an alarm if
violated, and is used when leaving the premises. The system will arm after the
designated countdown time (Exit delay) and a local message will sound. Once you have
armed the system, exit via the designated final exit door.
To arm using Away (Full) arming procedure
Quick mode:
High security mode: Press
Quick mode:
High security mode:
Press
Send SMS : [Code][A], example, 1234A
Agility 3 User Manual
Ready LED and make sure that the system is ready
+ code
+ code or proximity tag
Page 12