Heartway Medical Products S12 User Manual page 24

１５、Buttons
ITEM
Button
General Display Mode
(TRIP)
Setting Mode
Escape from Setting
Mode
Operation Status
Remarks
SPECIFICATION
"MODE" switch
Press SET for 3 seconds to reset TRIP at "00.0".
Press MODE and
"Setting Mode", then 『Hour：MIN』start flashing.
(1) When『Hour』flashing:
Press SET to increase of number, then press
Mode" of 『MIN』.
(2) When『MIN』flashing:
Press SET to increase of number, then press
Mode" of 『km/h & mph』.
(3) When 『km/h』 or 『mph』flashing
Press SET to choose "km/h" or "mph" type, then press .MODE
"Setting Mode" of 『°C / °F』
(4) When『°C』or『°F』flashing
to choose °C or °F .
Press SET
Under setting mode, if below situations happened, will auto save the last setting
value then escape to general operation mode.
(1) No any operation of ADJ button for 20 sec.
(2) Press MODE
(1) 『Hour：Min』,『km/h』or『mph』,『°C』or『°F』offer Cyclical Switch function.
(2) When adjusting 『Hour：Min』, press
for more than 2 seconds, the number will increase continuously until button
released, setting value with Cyclical Switch function (only 2 seconds from 0 to 9).
* If『Hour』less than 10, the denary "0" doesn't display.。
Button tones: one short "Bi" sound
Function set
SET simultaneously for more than 2 seconds. to enter
and SET at same time for more than 2 sec.
24
MODE
MODE
SET to increase number, if press
to enter "Setting
to enter "Setting
to enter
SET