Dell PowerEdge C6220 II Owner's Manual page 91

Option
C-States
(Enabled default)
C1E State
(Enabled default)
C6 State
(Enabled default)
C7 State (If support)
(Enabled default)
XD Bit Capability
(Enabled default)
Direct Cache Access
(Enabled default)
Hyper Threading Technology
(Enabled default)
CPU RAPL Big Dial
Description
Enabled - The processor can operate in all available
Power C States.
Disabled - There are no C States available for the
processor.
Enabled - The C1-E is enabled by default.
Disabled - The C1-E is disabled by users in their own
liability.
There will be warning message in both the BIOS Setup
help text and the pop up message when the option is
changing.
Enabled - The C6 is disabled by default.
Disabled - The C6 is disabled by user in their own
liability.
There will be warning message in both the BIOS Setup
help text and the pop up message when the option is
changing.
Enabled-The C7 is enabled by default.
Disabled-The C7 is disabled by users in their own
liability.
There will be warning message in both the BIOS Setup
help text and the pop up message when the option is
changing.
Intel processors that support the eXecute Disabled
(XD) feature will Enable/ Disable report the support to
the operating system.
If the operating system supports this extended paging
mechanism, it will provide some protection against
software viruses that exploit.
Enables/Disables the Direct Cache Access.
Enables/Disables Hyper-Threading Technology.
Sets off to disable CPU RAPL feature. Power Limit
(Watt#)=CPU RAPL Big Dial – CPU RAPL Small
Using the System Setup Program | 91