Table of Contents
Advertisement
2. Click New and configure these fields.
MAC Address
VLAN Name
Type
Port
3. Click Apply .
4. To remove an entry for the Entries list, select the entry and click Delete .
To configure multicast MAC address forwarding
The multicast MAC address settings configure the switch to forward multicast packets from a
specific MAC address to a specified VLAN. The port settings determine which ports can join the
VLAN to forward the multicast packets.
1. In the left panel, click Forwarding .
2. In the top panel under MAC Forwarding, click Multicast MAC Address Settings .
3. Click New and configure these fields.
MAC Address
VLAN Name
State
4. Click Apply .
To configure storm control
The storm control settings allow you to specify thresholds for broadcast or multicast traffic that
will activate storm control. When the threshold is exceeded, the switch drops the broadcast or
multicast traffic. When the traffic level drops below the threshold, the switch resumes forwarding
the traffic again.
1. In the left panel, click Forwarding .
2. In the top panel under MAC Forwarding, click Broadcast/Multicast Storm Control .
Intel® NetStructure™ ZT 8101 10/100 Ethernet Switch User's Manual
Field
Specifies the unicast MAC address in the packets.
Specifies the VLAN to which the MAC address belongs.
Specifies whether to forward the packets (Static) or to drop the packets
(BlackHole).
Specifies which port to use for forwarding the packets. This option is not
available if BlackHole is specified as the type.
Field
Specifies the MAC address of the source of the multicast packets.
Specifies which VLAN to forward the multicast packets to.
Specifies how the port can join the multicast group.
• Engress—Specifies that the port is a static member of the multicast
group.
• Forbidden—Restricts the port from joining the multicast group.
• None—Specifies that the port has no restrictions and that it can join the
multicast group dynamically.
Using the Web Console
Description
Description
115
Advertisement
Table of Contents
