To View The Arp Table; Status; To View Gvrp Status; To View The Router Ports - Intel ZT 8101 10/100 User Manual

Table of Contents

Advertisement

To view the ARP table

1. From the Main Menu, select Network Monitoring | ARP Table and press Enter.
2. Enter the IP interface name and the IP address, highlight FIND , and press Enter .
The following information is displayed in the table.
Interface
IP Address
MAC Address
Type
3. To delete an entry from the table, enter its information in the fields, highlight CLEAR , and
press Enter .

Status

To view GVRP status

From the Main Menu, select Network Monitoring | GVRP and press Enter. The GVRP Status
screen contains the following information.
Number of IEEE 802.1Q VLANs
IEEE 802.1Q VLAN ID
Current Egress Ports
Current Untagged Ports
Status
Creation time since switch power up
Note: If more than one IEEE 802.1Q VLAN has been defined for the switch, use CTRL+N to view the
status of the other VLANs.

To view the router ports

Router ports can be either static or dynamic. Static ports are ports that you manually configure to
route UDP multicast packets. Dynamic ports are added by the switch when the switch detects UDP
multicast packets and IGMP multicast group membership reports on a port.
1. From the Main Menu, select Network Monitoring | Router Ports and press Enter.
2. In the VLAN Name field, enter the name of the VLAN to search for router ports. Highlight
FIND and press Enter .
Intel® NetStructure™ ZT 8101 10/100 Ethernet Switch User's Manual
Column
The IP interface name corresponding to the IP address.
The IP address that corresponds to the MAC address.
The MAC address that corresponds to the IP address.
The method that was used to enter the IP address and MAC address pair
into the ARP table. The possible entries are Static, Dynamic, and Local.
Field
Using the Telnet Console
Description
Description
The number of VLANs that have been defined for the
switch.
The ID assigned to the currently displayed VLAN.
The ports in the VLAN that are egress ports.
The ports in the VLAN that are untagged.
The status of the VLAN, whether it is a permanent
definition or whether the ports dynamically joined the
VLAN.
The time the VLAN was created or last modified,
relative to when the switch was last booted.
65

Advertisement

Table of Contents
loading

This manual is also suitable for:

Netstructure zt 8101 10Netstructure zt 8101 100

Table of Contents