User Priority Regeneration - Intel ZT 8101 10/100 User Manual

Using the Telnet Console
1. From the Main Menu, select Priority Settings , and press Enter .
2. Select Priority Based on Port , and press Enter .
3. Select and configure these fields.
Configure port from
Default Priority
4. Highlight APPLY and press Enter.
5. To change an entry, repeat steps 3-4.

User Priority Regeneration

You can enable User Priority Regeneration to set the 802.1p priority bit to a user defined level for
all egress frames.
1. From the Main Menu, select Priority Settings , and press Enter .
2. Select User Priority Regeneration , and press Enter .
3. Select and configure these fields.
Priority 0
Priority 1
Priority 2
Priority 3
Priority 4
Priority 5
Priority 6
Priority 7
4. Highlight APPLY and press Enter.
5. To change an entry, repeat steps 3-4.
76
Field
Specifies which port(s) to configure (1-26).
Specifies the priority for this port. The levels are 0 —7, with 7 being the highest
priority.
Field
Specifies the regenerated priority for all egress frames which currently have a
level of 0. The levels are 0 —7, with 7 being the highest priority.
Specifies the regenerated priority for all egress frames which currently have a
level of 1. The levels are 0 —7, with 7 being the highest priority.
Specifies the regenerated priority for all egress frames which currently have a
level of 2. The levels are 0 —7, with 7 being the highest priority.
Specifies the regenerated priority for all egress frames which currently have a
level of 3. The levels are 0 —7, with 7 being the highest priority.
Specifies the regenerated priority for all egress frames which currently have a
level of 4. The levels are 0 —7, with 7 being the highest priority.
Specifies the regenerated priority for all egress frames which currently have a
level of 5. The levels are 0 —7, with 7 being the highest priority.
Specifies the regenerated priority for all egress frames which currently have a
level of 6. The levels are 0 —7, with 7 being the highest priority.
Specifies the regenerated priority for all egress frames which currently have a
level of 7. The levels are 0 —7, with 7 being the highest priority.
Intel® NetStructure™ ZT 8101 10/100 Ethernet Switch User's Manual
Description
Description