Fitting / Removing Brush Heads; Operation; Brushing One's Teeth - Dentalux DAZ 2.4 A1 Operating Instructions Manual

Fitting / removing brush heads

To remove the brush head 1, turn it clockwise and then pull
it upwards.
To fi t the brush head 1 place it slightly off set on the hand
element and then turn it anti-clockwise.
The brush head 1 must engage on being put back on. To
avoid damage to the appliance, use only original brush heads.
(For replacement brush heads, see the order card)

Operation

This toothbrush has 3 diff erent performing levels:
- "Clean": normal speed level, orange LED 8
For cleaning the teeth.
- "Soft": slow speed level, green LED 7
For cleaning the teeth of people with sensitive gums.
- "Pulse": variable speed levels, yellow LED 6
For massaging the gums.
• Press the on/off switch 9 once to switch the level "Clean"
on. The "Clean" LED 8 glows.
• Press once more to switch to the level "Soft". The "Soft"
LED 7 glows.
• Press it a third time to switch to the level "Pulse".
The "Pulse" LED 6 glows.
• To switch the toothbrush off , press once more on the on/
off switch 9.

Brushing one's teeth

Warning:
Due to the unaccustomed operation some gum bleeding may
initially occur, this is normal. Should this continue for more
than two weeks, consult your dentist.
- 6 -